Bring dull, faded and weathered surfaces back to life with the ultimate restoration duo – Owatrol Pura-Trol and Polytrol. Now available together in this convenient bundle, giving you everything you need for long-lasting results whilst also saving you money.
Why Choose the Pura-Trol & Polytrol Bundle?
These two products are designed to complement each other, delivering the best restoration and protection in one package:
Step 1: Deep Clean with Pura-Trol
Pura-Trol is specially formulated to remove dirt, grease and grime from surfaces such as plastics, metals, fibreglass and more. By thoroughly cleaning and preparing the surface, it ensures a perfect base for the use of Polytrol.
Step 2: Revive & Protect with Polytrol
Once cleaned with Pura-Trol and allowed to fully dry, apply Polytrol to rejuvenate the faded, dull or weathered surface. Its penetrating formula restores the original colour, richness and lustre.
When used together, these products provide superior results.
Pura-Trol is Perfect For:
✅ Cleaning vehicles, alloys, engines etc.
✅ Reviving and cleaning boats
✅ Degreasing surfaces ready for varnishing
✅ Degreasing other surfaces such as cooker hoods
Polytrol is Perfect For:
✅ Restoring faded vehicle bumpers and trims, composite front doors, guttering and downpipes, garden furniture etc.
✅ Rejuvenating gelcoat
✅ Reviving dulled metal & stone surfaces
✅ Preparing & protecting automotive surfaces
Bundle Contents
- x1 125ml bottle of Polytrol
- x1 125ml bottle of Pura-Trol
- FREE next working day delivery, when ordered before 2pmÂ
A little goes a long way and as such, we have found this size is perfect for the smaller more popular jobs, such as restoring vehicle bumpers and trims, guttering and down pipes, or on the front door. However, we do also have other sizes of both products available, should you require a larger quantity.
Restrictions
DO NOT use Polytrol on white surfaces, it will not work as Polytrol is designed to restore pigments.
Application tools for Pura-Trol
- Pump Sprayer
- Brush
- Sponge
- Hose
- Power Washer
Surface Preparation for Pura-Trol
First, remove any organic surface growth – moss for example.
Dirty Surfaces: 1 part Pura-Trol to 20 parts water.
Very Dirty Surfaces: 1 part Pura-Trol to 10 parts water (for use on wheels for example).
Pura-Trol is a concentrated formula. Use only the recommended dilutions. Do not use undiluted
Application of Pura-Trol
- Make up a diluted solution as dictated by the surface contamination.
- Stir or shake the solution well to ensure Pura-Trol is well mixed in.
- Apply diluted Pura-Trol to the surface using a brush, sponge or pump sprayer.
- Allow the solution to work for 10 minutes.
- Do not allow the solution to dry on the surface while working.
- Rinse the surface with fresh clean water using a hose, power washer or bucket and sponge (making sure you change
water regularly).
Things to remember
- Cover everything you do not wish to clean.
- Apply between 10°C and 25°C.
- Do not apply in direct sunlight or to hot surfaces.
- When applying by spray, adjust the nozzle to prevent the formation of a mist.
Surface Preparation for Polytrol
All surfaces must be clean, dry and free of dirt, grease, grime and mildew. All waxes, polishes, silicone etc. should be completely and thoroughly removed. Treat any mildew with a 50:50 bleach and water solution. Scrub the solution on to the surface and allow it to stand for 10-15 minutes then rinse thoroughly.
Using Polytrol on plastic, gelcoat, tiles, painted surfaces etc.
Clean the surface with warm soapy water, Pura-Trol or Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on stone, brick, etc.
Clean the surface with Pura-Trol or Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on metal
Clean the surface with warm soapy water and rinse thoroughly or use an appropriate solvent (follow manufacturer’s instructions). Leave the surface to dry for a minimum of 24 hours.
Application of Polytrol Colour Restorer
General directions
Always work in areas that can be completed 10-20 minutes to ensure an even appearance. If the surface absorbs the Polytrol unevenly (i.e. some matt and some shiny patches) move any surplus oil from shiny areas to matt areas. Always wipe away excess Polytrol with a lint-free cloth before it becomes tacky. For a shinier finish, buff the surface with a lint-free polishing cloth.
When using the Polytrol 250ml spray can, simply spray on liberally, wipe off the excess and leave to dry.
Applying Polytrol to plastic, gelcoat, tiles, painted surfaces etc.
Apply Polytrol liberally and evenly with a brush or cloth. Allow it to work for 10-20 minutes. Wipe off the excess with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to stone, brick, etc.
Apply Polytrol liberally and evenly with a brush or cloth and leave it to work for 10-20 minutes. Brush out or wipe off the excess Polytrol with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to metal
Apply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off the excess Polytrol with a clean lint-free cloth. Leave to dry.
Note: Excess Polytrol must be wiped away. It is not a surface coating and as such, its place is in the surface, not on top.
Maintenance
Maintenance is due when a Polytrol treated surfaces shows signs of fading. Prepare and re-treat surfaces as directed above.
Clean Up
Clean any tools used with white spirit. Polytrol is non-flammable, however any rags, steel wool etc. soaked in Polytrol may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing of them with household waste. Rags may be laid flat and air-dried before discarding.
Things to Remember
- Cover and protect everything you do not wish to treat.
- Apply between +5°C and +35°C.
- Do not apply in direct sunlight or on to hot surfaces.
- Do not allow excess Polytrol to dry and create a film on the surface (always remove excess product).
- Do not use Polytrol on white surfaces.
James Turner –
Verified Owner
I contacted the company about the suitability of applying polytrol to to composite decking and had a very swift reply to my enquiries. I purchased the small 125ml pot to test on a small area and it worked amazingly well. The decking is over ten years old and isn’t even made anymore! The area is around 30 square meters and just over a litre covered it.
A great product and I will be using it again.
Originally posted on Polytrol
Owatrol Team –
Hi there James,
Thank you for your kind words – it’s excellent to hear (and see!) that you had a great experience with Owatrol Polytrol on your composite deck 🙂
All the best,
The Owatrol Team
Originally posted on Polytrol
Charles Cruickshank –
Verified Owner
Excellent results on sun bleached downpipes. Easy to use, I was delighted with the results
Originally posted on Polytrol
Owatrol Team –
Hi there Charles,
Thanks so much for your kind review – it’s great to hear that Owatrol Polytrol worked wonders for reviving your sun bleached downpipes.
All the best,
The Owatrol Team
Originally posted on Polytrol
Jane Coyle –
Verified Owner
Excellent stuff .
Restored my faded SUV bumpers to a nice ,like new black.
I’ve tried various other products but they were all disappointing.
Until I tried this, very happy with my results.
I’m thinking what to use it on next.
You just need to use a little as it goes far , plenty left for another use.
Highly Recommend.
Originally posted on Polytrol
Colin Foxall –
Verified Owner
Excellent. Rejuvenated colour faded door brilliantly.
Originally posted on Polytrol
Nick beasley –
Verified Owner
Used to restore a rather faded PVC front door gave the door a good wash down allowed to dry then applied the Owartol sparingly with a brush I was amazed at the result door looks as good as new still had loads left over so tried it on some plastic down pipe that that had also faded to grey but is now back to black fantastic product would highly recommend
Originally posted on Polytrol
Owatrol Team –
Hi there Nick,
Thank you so much for you kind review of Polytrol being used on your faded PVC front door and faded plastic down pipes.
We’re so happy to hear how well it worked out for you and that you would recommend it to others too.
All the best,
The Owatrol Team
Originally posted on Polytrol
Brian smyth –
Verified Owner
A great bit of kit ,worked as you said .
Originally posted on Polytrol
Margaret Flynn –
Verified Owner
Brilliant stuff. My door looks like new!!
Originally posted on Polytrol
Richard Bailey –
Verified Owner
Have used this Polytrol before on out composite front door. It’s black and in direct sunshine and weather
A soapy clean and sponge on of polytrol and back to looking new
I buy the 125ml which is more than enough
Originally posted on Polytrol
Owatrol Team –
Hi there Richard,
Thank you for your review of Polytrol – we’re happy to hear how well it worked for your black composite front door 🙂
All the best,
The Owatrol Team
Originally posted on Polytrol
John Drumm –
Verified Owner
Tried a small sample tin of polytrol with a view to trying it on my vinyl sided static caravan .
Used it on our composite front door at home which had faded quite badly with being a dark colour, only used a small amount but it a significant improvement.
Tried it my faded vinyl caravan after firstly rigorously cleaning it with a white vinegar and water solution to remove any oxidation , the colour difference was quite a surprise from faded white back to cream . Still early days as regards longevity but looking good.
Originally posted on Polytrol
Andrea Popp –
It’s so easy to do use! It only took me all of 15mins to do! Waited 20mins then give it a wipe over! I’m Very impressed!
Originally posted on Polytrol
Owatrol Team –
Hi there Andrea,
Thank you for your review, as well as before and after pictures of Polytrol being used on your front door – it looks amazing!
All the best,
The Owatrol Team
Originally posted on Polytrol