A customer recently sent some before and after shots of a project completed on their 15 year old Land Rover. They used Polytrol to restore the shine to paintwork on the exterior. It’s not a long and laborious job, quite the contrary!
Restore shine to paintwork with Polytrol
Using Polytrol couldn’t be easier. Firstly, you need to clean the surface using soapy water and allow it to dry (you can also use Net-Trol for cleaning). Next, you simply apply a generous layer of Polytrol with a brush or cloth. Then, leave it for 10-20 minutes and finally wipe off any excess to leave a revived surface. We would recommend that you work in areas that can be completed in 10-20 minutes to ensure even coverage.
Polytrol is a deep penetrating oil which restores the original colour and appearance of dull or tarnished plastics, gelcoats, metals and more. It penetrates the surface, re-wetting the pigments to restore their lustre and colour which has been lost through exposure to sunlight, rain and pollution. It also gives corrosion protection.
It’s not only for use on faded plastics and paintwork either, it has a whole heap of uses. When used on tarnished metals, it brings back the shine and gives long-term protection against corrosion. Polytrol can even be used on fibreglass (GRP) making it perfect for such a wide variety of uses. It’s even perfectly safe to use on children’s garden equipment too. Great for dealing with the sun-faded playhouse and slide!
We hope you found this post on a Land Rover’s paintwork revived with Polytrol interesting. If you have any other advice or top tips, please feel free to leave them in the comments below. We love hearing from you!
You can also follow us on Twitter, Facebook, Instagram or Pinterest at @OwatrolUK or find us under the hashtag #OwatrolUK
Hi i have a 17 meter yatch to paint which the owner tells me he hqs been applying polytrol on the gelcoat hull my question is how do you remove the polytrol so we can paint the hull
Hi there,
I have passed your question onto our technical team and will have an answer for you as soon as possible.
Many thanks,
The Owatrol Team
Hi there,
Our technical guys have said that Dilunett would be the best product to remove Polytrol from the yacht hull. If you need nay advice about applying it then don’t hesitate to ask.
Many thanks,
The Owatrol Team
Hi – would Dilunett be the best product to remove Polytrol off any surface SAFELY, without damaging any paintwork underneath? ie. A narrowboat
Many thanks in advance
Hi there Ric,
When paint is underneath dried Polytrol, Aquanett ( https://www.owatroldirect.co.uk/product/aquanett/ ) is often the better choice as it will remove the Polytrol but not the paint underneath. It is always worth testing on a small area first whichever option you choose – sample sizes are available for both these products and can be found on the product pages.
If you have further questions, please feel free to call us directly on: 01582 592707 or email us at: sales@owatroluk.com where our technical team will be able to assist you further.
All the best,
The Owatrol Team
Thank you – I see your webpage for ‘Aquanett’ mentions removing Polytrol off WOOD surfaces. Will it remove oils off METAL surfaces too? ie a narrowboat. If not, please can you recommend a product to do this.
Many thanks
Hi again Ric,
A member of our technical team will be emailing you shortly to assist you with your further queries.
All the best,
The Owatrol Team
Would this work on lacquered paint work (car) that has started to peel off exposing paint underneath lacquer to fade, i.e would this bring back shine instead of having car re lacquered
Hi there Alan,
Polytrol could work for this purpose so long as the colour is not white. To get an effective shine you will need to buff the surface with a lint-free polishing cloth after you have finished the application process. We recommend purchasing a 100ml sample pot for £6 with free postage and testing it out first: https://www.owatroldirect.co.uk/product/polytrol
All the best,
The Owatrol Team
How long does the Polytrol treatment last on car paint? Is it possible to apply a normal car body wax or paint sealant over the top to prolong the life of the Polytrol treatment? Thanks
Hi there Ben,
It varies as to how long Polytrol will last depending on the levels of UV rays, weathering and pollution the surface is exposed to. As a general rule of thumb, Polytrol will usually last around 12 months before you need to reapply.
However, surfaces exposed to high UV and weathering (such as by the sea) will require it more often, whereas surfaces that do not have this type of extreme exposure won’t require another application for potentially 24+ months.
We do have 125ml tins available which are a good size to use for testing, should you wish to give it a trial first.
We don’t really recommend using a sealant or anything of that nature over the top of Polytrol, as when it comes to reapplying it (which will always inevitably happen, whether it’s in 1 or 2+ years time), you will need to remove the sealant / top coating before application, which can be timely and expensive – this is because anything on the surface will block Polytrol from being able to penetrate into the substrate and thus will not give you the result you are looking for.
I hope this was helpful, please feel free to give us a call on : 01582 592707 or email us at: sales@owatroluk.com should you require any further assistance.
All the best,
The Owatrol Team
Reference the 2021 question above regarding use over lacquer peeling car paintwork. As it’s 3 years since this is there any more info regarding this ? I have patches like stated and car is metallic blue. Hope you can help
Hi there Andrew,
Thank you for your query.
Please send some photos of the effected area over to our technical team at: tech@owatroluk.com where they will be able to assist you further.
All the best,
The Owatrol UK Team