Polytrol is a deep penetrating oil which restores the original colour and appearance of dull or tarnished plastics, gelcoats, metals, and other surfaces.
It penetrates the surface, re-wetting the pigments to restore their lustre and colour which has been lost through exposure to sunlight, rain, and pollution and it also gives corrosion protection. Â When used on tarnished metals, it brings back the shine and gives long-term protection against corrosion.
Simple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces and can even be used on fibreglass (GRP). Polytrol dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake.
Polytrol is now available in a handy 250ml spray can, great for quick application and difficult to reach areas. Please see the directions for use to find out how to apply it.
Ideal Uses for Polytrol Colour Restorer
- Brightening faded car bumpers
- Reviving the gelcoat on your boat
- Restoring the shine to metal fixtures
- Rejuvenating flat or chalky paint dulled by weathering
- Brightening the surface of tiles in stone, terracotta, marble, slate, etc.
- Reviving the colour of faded garage doors
Restrictions
DO NOT use Polytrol on white surfaces, it will not work as Polytrol is designed to restore pigments.
Surface Preparation
All surfaces must be clean, dry and free of dirt, grease, grime and mildew. All waxes, polishes, silicone etc. should be completely and thoroughly removed. Treat any mildew with a 50:50 bleach and water solution. Scrub the solution on to the surface and allow it to stand for 10-15 minutes then rinse thoroughly.
Using Polytrol on plastic, gelcoat, tiles, painted surfaces etc.
Clean the surface with warm soapy water or Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on stone, brick, etc.
Clean the surface with Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on metal
Clean the surface with warm soapy water and rinse thoroughly or use an appropriate solvent (follow manufacturer’s instructions). Leave the surface to dry for a minimum of 24 hours.
Application of Polytrol Colour Restorer
General directions
Always work in areas that can be completed 10-20 minutes to ensure an even appearance. If the surface absorbs the Polytrol unevenly (i.e. some matt and some shiny patches) move any surplus oil from shiny areas to matt areas. Wipe off any excess Polytrol with a lint-free cloth before it becomes tacky. For a shinier finish, buff the surface with a lint-free polishing cloth.
When using the Polytrol 250ml spray can, simply spray on liberally, wipe off any excess and leave to dry.
Applying Polytrol to plastic, gelcoat, tiles, painted surfaces etc.
Apply Polytrol liberally and evenly with a brush or cloth. Allow it to work for 10-20 minutes. Wipe off any excess with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to stone, brick, etc.
Apply Polytrol liberally and evenly with a brush or cloth and leave it to work for 10-20 minutes. Brush out or wipe off any excess Polytrol with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to metal
Apply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off any excess Polytrol with a clean lint-free cloth. Leave to dry.
Note: Polytrol is not a surface coating. Its place is in the surface, not on top.
Maintenance
Maintenance is due when a Polytrol treated surfaces shows signs of fading. Prepare and re-treat surfaces as directed above.
Clean Up
Clean any tools used with white spirit. Polytrol is non-flammable, however any rags, steel wool etc. soaked in Polytrol may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing of them with household waste. Rags may be laid flat and air-dried before discarding.
Things to Remember
- Cover and protect everything you do not wish to treat.
- Apply between +5°C and +35°C.
- Do not apply in direct sunlight or on to hot surfaces.
- Do not allow excess Polytrol to dry and create a film on the surface (always remove excess product).
- Do not use Polytrol on white surfaces.
ria kirby –
Verified Owner
Saw somebody else use this product on doors and ledges.
I purchased someband tried it on plastic screening attached to a gate.
I couldnt believe how well it restored the colour!!
Steven Clarke –
Excellent Changed my greying front door to shiny black!
Russell –
Verified Owner
I am delighted with my restorer. Which I used on the dashboard of my MGB which was very dull looking.
It is now bright, black and shiny and looking very smart. Great product, did exactly what I wanted.
Mike –
Verified Owner
Great product. Saved a fortune versus having my front door resprayed.
John Curtis –
Verified Owner
Great Product.Soon brings back the black on faded trims and a little goes a long way
Barry Reed –
Verified Owner
First time I have purchased this product and it was bought to brighten up my doors and windows. They were all thoroughly cleaned down as per instructions and the product applied. It was straightforward and easy to apply and dried fairly quickly. I was delighted with the result and felt the cost was reasonable. My neighbours were equally impressed with the finish it provided. I would certainly recommend this product.
Anthony Wilson –
Verified Owner
Arrived promptly, safely wrapped up and in great condition.
Used on all the faded plastic on my 20 year old Porsche as polytrol had been recommended on most car forums for plastic trim reviving.
It completely restored the plastic from grey back to factory black, especially on the windscreen scuttle, and was an incredible transformation.
I only used 10ml to treat the whole car as a little bit goes a long way!
It has been on a month now through rain and sun and no change, so extremely happy with its performance to date.
Try it – you will not be disappointed!
Helena –
Verified Owner
Purchased some polytrol colour restorer the other day, used today and I am amazed by the results!! Used on a faded, chalky horse trailer. The before and after pics speak for themselves!! Super easy to apply and no hassle at all! Bought a 1L tub and I’ve still got over half left over for future use. Highly recommend.
Helena –
Verified Owner
Purchased some polytrol colour restorer the other day, used today and I am amazed by the results!! Used on a faded, chalky horse trailer. The before and after pics speak for themselves!! Super easy to apply and no hassle at all! Bought a 1L tub and I’ve still got over half left over for future use. Highly recommend.
John Roberts –
Verified Owner
I was very impressed.
I wanted to restore the colour of a badly faded UPVC door. It didn’t get it back to the original dark blue – I think that would have been asking too much – but it was good enough.
I guess I will now be applying an annual coat & I’d certainly recommend it to friends.