Polytrol is a deep penetrating oil which restores the original colour and appearance of dull or tarnished plastics, gelcoats, metals, and other surfaces.
It penetrates the surface, re-wetting the pigments to restore their lustre and colour which has been lost through exposure to sunlight, rain, and pollution and it also gives corrosion protection. Â When used on tarnished metals, it brings back the shine and gives long-term protection against corrosion.
Simple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces and can even be used on fibreglass (GRP). Polytrol dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake.
Polytrol is now available in a handy 250ml spray can, great for quick application and difficult to reach areas. Please see the directions for use to find out how to apply it.
Ideal Uses for Polytrol Colour Restorer
- Brightening faded car bumpers
- Reviving the gelcoat on your boat
- Restoring the shine to metal fixtures
- Rejuvenating flat or chalky paint dulled by weathering
- Brightening the surface of tiles in stone, terracotta, marble, slate, etc.
- Reviving the colour of faded garage doors
Restrictions
DO NOT use Polytrol on white surfaces, it will not work as Polytrol is designed to restore pigments.
Surface Preparation
All surfaces must be clean, dry and free of dirt, grease, grime and mildew. All waxes, polishes, silicone etc. should be completely and thoroughly removed. Treat any mildew with a 50:50 bleach and water solution. Scrub the solution on to the surface and allow it to stand for 10-15 minutes then rinse thoroughly.
Using Polytrol on plastic, gelcoat, tiles, painted surfaces etc.
Clean the surface with warm soapy water or Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on stone, brick, etc.
Clean the surface with Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on metal
Clean the surface with warm soapy water and rinse thoroughly or use an appropriate solvent (follow manufacturer’s instructions). Leave the surface to dry for a minimum of 24 hours.
Application of Polytrol Colour Restorer
General directions
Always work in areas that can be completed 10-20 minutes to ensure an even appearance. If the surface absorbs the Polytrol unevenly (i.e. some matt and some shiny patches) move any surplus oil from shiny areas to matt areas. Wipe off any excess Polytrol with a lint-free cloth before it becomes tacky. For a shinier finish, buff the surface with a lint-free polishing cloth.
When using the Polytrol 250ml spray can, simply spray on liberally, wipe off any excess and leave to dry.
Applying Polytrol to plastic, gelcoat, tiles, painted surfaces etc.
Apply Polytrol liberally and evenly with a brush or cloth. Allow it to work for 10-20 minutes. Wipe off any excess with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to stone, brick, etc.
Apply Polytrol liberally and evenly with a brush or cloth and leave it to work for 10-20 minutes. Brush out or wipe off any excess Polytrol with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to metal
Apply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off any excess Polytrol with a clean lint-free cloth. Leave to dry.
Note: Polytrol is not a surface coating. Its place is in the surface, not on top.
Maintenance
Maintenance is due when a Polytrol treated surfaces shows signs of fading. Prepare and re-treat surfaces as directed above.
Clean Up
Clean any tools used with white spirit. Polytrol is non-flammable, however any rags, steel wool etc. soaked in Polytrol may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing of them with household waste. Rags may be laid flat and air-dried before discarding.
Things to Remember
- Cover and protect everything you do not wish to treat.
- Apply between +5°C and +35°C.
- Do not apply in direct sunlight or on to hot surfaces.
- Do not allow excess Polytrol to dry and create a film on the surface (always remove excess product).
- Do not use Polytrol on white surfaces.
John Lewis –
Last week I purchased a 500 ml tin of your Polytrol to restore our 18-year-old composite (plastic coated) front door. With carriage it cost me £22, the best investment I have made for many a year – door now looks like new! Thank you.
Easy to apply after thoroughly cleaning the door, Polytrol applied over sections of door with a soft/clean rag and excess wiped away asap, final polish after a couple of hours (warmish day). My only struggle – getting the tin open!
I’m now looking for something else to refurbish with the rest of the Polytrol!
David –
Ex product . Black composite Door looks brand new
10 min s to apply . Incredible !!!
Edward Morgan –
Verified Owner
I have just used Polytrol on my composit door it has totally renewed it, I am very pleased with the product . E Morgan
Eileen –
I am absolutely amazed at this product. I thought I would need a new composite door at a cost of £1,500++ as it was so faded and scratched. I bought this Owatrol colour restorer after seeing it on YouTube.
Applied it with a cloth after thoroughly rubbing it down with a washing up scourer. Took about 20 minutes to apply. My door looks as good as new. Fantastic product.
Photos show before and after.
Pete –
Brilliant stuff! Didn’t quite believe all the amazing reviews but did a fantastic job bringing our 17 year old badly faded wood effect GRP garage door back to life! Only used about half a 500ml tin, just washed the door, let dry and then wiped it in with a cloth. That was it and wow, what a difference in the before and after pictures!
Owatrol Team –
Hi there Pete,
Thanks so much for the lovely review!
We would love to see and share your before and after pictures – would you be happy to send them over to us at sales@owatroluk.com ?
Thanks again.
All the best,
The Owatrol Team
Joan Grant –
I recently used Polytrol on a navy blue composite front door and I’m delighted with the result! Its a fantastic product and I thought you might like to see my before and after pictures.
Thanks for an amazing product.
Sally Butters –
Verified Owner
Just used Owatrol Polytrol on my wood grain garage door and it’s absolutely fantastic.
My door was sun beaten and very sorry for itself. I read all the reviews and thought it can’t be that good but I had nothing to lose so I gave it ago, and I must say the reviews are spot on. It’s easy and quick to apply and gives an outstanding result.
Sally Butters –
Verified Owner
Just used Owatrol Polytrol on my wood grain garage door and it’s absolutely fantastic.
My door was sun beaten and very sorry for itself. I read all the reviews and thought it can’t be that good but I had nothing to lose so I gave it ago, and I must say the reviews are spot on. It’s easy and quick to apply and gives an outstanding result.
Fran Woodhouse –
Polytrol arrived today and has made a huge difference to our Composite front door which was in rather a sorry state before.
I have attached some before and after photos in case you are interested!
Helen B –
I purchased polytrol last week to use on my composite front door which had lost its surface and faded over the years. The product was very easy to use and has restored the door to its former colour. I must admit I was a little apprehensive in using this product at first as there was very little information available about using it on front doors but am now glad I did as I have the appearance of a new front door for such a small price. I would thoroughly recommend polytrol colour restorer to anyone wanting to revive their faded UPVC/Composite doors/windows etc. Well worth doing and as easy as it says on the tin. Just use a cloth to apply, wipe off the excess and let it dry! The finish was better than I expected.