Polytrol is a deep penetrating oil which restores the original colour and appearance of dull or tarnished plastics, gelcoats, metals, and other surfaces.
It penetrates the surface, re-wetting the pigments to restore their lustre and colour which has been lost through exposure to sunlight, rain, and pollution and it also gives corrosion protection. Â When used on tarnished metals, it brings back the shine and gives long-term protection against corrosion.
Simple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces and can even be used on fibreglass (GRP). Polytrol dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake.
Polytrol is now available in a handy 250ml spray can, great for quick application and difficult to reach areas. Please see the directions for use to find out how to apply it.
Ideal Uses for Polytrol Colour Restorer
- Brightening faded car bumpers
- Reviving the gelcoat on your boat
- Restoring the shine to metal fixtures
- Rejuvenating flat or chalky paint dulled by weathering
- Brightening the surface of tiles in stone, terracotta, marble, slate, etc.
- Reviving the colour of faded garage doors
Restrictions
DO NOT use Polytrol on white surfaces, it will not work as Polytrol is designed to restore pigments.
Surface Preparation
All surfaces must be clean, dry and free of dirt, grease, grime and mildew. All waxes, polishes, silicone etc. should be completely and thoroughly removed. Treat any mildew with a 50:50 bleach and water solution. Scrub the solution on to the surface and allow it to stand for 10-15 minutes then rinse thoroughly.
Using Polytrol on plastic, gelcoat, tiles, painted surfaces etc.
Clean the surface with warm soapy water or Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on stone, brick, etc.
Clean the surface with Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on metal
Clean the surface with warm soapy water and rinse thoroughly or use an appropriate solvent (follow manufacturer’s instructions). Leave the surface to dry for a minimum of 24 hours.
Application of Polytrol Colour Restorer
General directions
Always work in areas that can be completed 10-20 minutes to ensure an even appearance. If the surface absorbs the Polytrol unevenly (i.e. some matt and some shiny patches) move any surplus oil from shiny areas to matt areas. Wipe off any excess Polytrol with a lint-free cloth before it becomes tacky. For a shinier finish, buff the surface with a lint-free polishing cloth.
When using the Polytrol 250ml spray can, simply spray on liberally, wipe off any excess and leave to dry.
Applying Polytrol to plastic, gelcoat, tiles, painted surfaces etc.
Apply Polytrol liberally and evenly with a brush or cloth. Allow it to work for 10-20 minutes. Wipe off any excess with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to stone, brick, etc.
Apply Polytrol liberally and evenly with a brush or cloth and leave it to work for 10-20 minutes. Brush out or wipe off any excess Polytrol with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to metal
Apply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off any excess Polytrol with a clean lint-free cloth. Leave to dry.
Note: Polytrol is not a surface coating. Its place is in the surface, not on top.
Maintenance
Maintenance is due when a Polytrol treated surfaces shows signs of fading. Prepare and re-treat surfaces as directed above.
Clean Up
Clean any tools used with white spirit. Polytrol is non-flammable, however any rags, steel wool etc. soaked in Polytrol may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing of them with household waste. Rags may be laid flat and air-dried before discarding.
Things to Remember
- Cover and protect everything you do not wish to treat.
- Apply between +5°C and +35°C.
- Do not apply in direct sunlight or on to hot surfaces.
- Do not allow excess Polytrol to dry and create a film on the surface (always remove excess product).
- Do not use Polytrol on white surfaces.
Elizabeth Hillman –
Verified Owner
Easy to use. Put on the patio doors. Left with a nice finish.
Very good product.
Owatrol Team –
Hi there Elizabeth,
Thank you for your kind review on Polytrol – we’re happy to hear it worked well on your patio doors.
All the best,
The Owatrol Team
Niki –
Verified Owner
Excellent service. It arrived free of charge the next day – very impressed. It literally did what it said on the tin! All very good.
Thank you.
Owatrol Team –
Hi there Niki,
Thank you very much for your Polytrol review – we’re happy to hear how well it worked for you.
All the best,
The Owatrol Team
Garry Knox –
Worth every penny. I’m on my second can. The best product for use on plastics, I have treated my black pvc front door. The finish has stayed as glossy as the day I brushed it on. No cracking or dullness. I use it on my car pvc bumpers. They look so smart almost like new. I am particularly fussy about products I buy but Polytrol does everything it promises
Owatrol Team –
Hi there Gary,
Thank you for your kind review on Polytrol. We’re happy to hear how well it has helped you to restore your front door and bumpers.
All the best,
The Owatrol Team
Steven Clarke –
Verified Owner
Second purchase Excellent product
Linda –
Great finish. Just wash the surface clean and paint or rub it on with a cloth. I used a small brush for my composite door. Easy to do. It must be as I’m 73 and did it myself. You can too if your steady in your feet. If your young and fit even more easy. 🙂
Owatrol Team –
Hi there Linda,
Thank you for your kind review on Owatrol Polytrol – we’re happy to hear how well it worked for you.
All the best,
The Owatrol Team
David vernon –
Verified Owner
Used on caravan veranda ,44 collars and 13 post caps which were 7 years old and very dull. Came up like new. Very easy to do. Only bought a 125ml tin and still got 100ml left. Excellent product
Owatrol Team –
Hi there David,
Thank you very much for your kind review of Polytrol – we’re happy to hear how well it worked for you and your caravan.
All the best,
The Owatrol Team
Lisa –
Verified Owner
Excellent product, green composite door looks like new. I have tried another product that claimed to renew and didn’t so super happy with the results plus not even used half a can so value for money too.
Owatrol Team –
Hi there Lisa,
Thank you for your kind review on Polytrol – we’re happy to hear the difference it made to your green composite door.
All the best,
The Owatrol Team
Diane Maile –
Verified Owner
Fantastic oil refurbished a metal pergola and a plastic bench from sun damage. It really surprised me how well they came up with owatrol . Have recommended to family and friends.
Diane Maile –
Verified Owner
Fantastic oil used to refurb metal pergola and also a plastic bench . Super happy and items have come up like new after sun damage. I’ve recommended to family and friends as they couldn’t believe the difference.
Owatrol Team –
Hi there Diane,
Thank you for your kind review on Polytrol. We’re happy to hear how well it worked for your pergola and bench.
All the best,
The Owatrol Team
Alan –
Verified Owner
Used on my black composite front door.
It has made an unbelievable difference and looks brand new. Really highlights the grain within the door so well worth the money and effort.
My go to product for the door going forward with plenty left in the tin.
Owatrol Team –
Hi there Alan,
Thank you for your kind review – we’re happy to her how well Polytrol worked for you.
All the best,
The Owatrol Team