Absolute Primer

A primer for bonding products from the Spirit range to difficult surfaces

At A Glance...

  • Excellent adhesion
  • Primer for the Owatrol Spirit product range
  • Odourless
  • Water-based
Absolute Primer from the Owatrol Spirit range

Absolute Primer is a priming coat for bonding products from the Spirit range to smooth, difficult and non-porous surfaces.

It offers excellent adhesion so you can move onto the next step of decoration using the Spirit Range.

Ideal uses for Absolute Primer

  • Prime glass, ceramics, non-ferrous metals, Stainless Steel etc
  • Once applied, can be used alongside any Spirit range product
  • Revamp your interior or exterior design
  • Decorate home ornaments
  • Use on external garden surfaces

Always read the Absolute Primer Technical Data Sheet before using and follow the instructions carefully.

Before you start

  • Cover and protect everything you do not wish to coat.
  • Apply between 5°C and 25°C.
  • Do not apply to hot surfaces.

Surface Preparation

  • Surfaces must be in good sound condition, clean, dry and free of all grease, oil and other surface contamination.
  • Meticulously clean surface using a suitable cleaning agent depending on the substrate and contamination e.g. Acetone, Hot Soapy Water (rinse thoroughly) etc.
  • Allow to dry
  • Sand plastic and shiny surface with fine grit abrasive to improve adhesion.
  • Thoroughly dust off.

Application of Absolute Primer

  • Use as is. Do not thin.
  • Stir or shake well before use.
  • Apply a coat of Absolute Primer to the surface being treated.
  • Allow to dry.
  • Finish with a product from the Owatrol Spirit range.

Restrictions

Do not use on Polyethylene or Polypropylene plastics.

Clean Up

Soap and water.

Reviews

There are no reviews yet.

Be the first to review “Absolute Primer”

How much do I need?

< Calculate Again
This coverage indication is only a guide and actual coverage is dependent on surface type, age, porosity etc.
Coverage: 8-10m2 per litre
Tools: Brush or Roller
Suitable for: Interior & Exterior use
Clean up: Soap & Water
Drying Time: 8 hours
Suitable Surfaces: All non porous surfaces – glass, ceramic, plastic etc