Natural Varnish

Before you start

• Cover and protect everything you do not wish to coat.
• Apply between 5°C and 25°C.
• Do not apply to hot surfaces.

Surface Preparation

Surfaces must be clean, dry, free of any surface contamination and previously finished with a decorative effect product from the Spirit range.

Application of Natural Varnish

• Use as is – do not thin and shake well before use.
• Apply an even application of Natural Varnish to all treated areas.
• Allow to dry.

With Natural Varnish it is possible to create a contrasting decorative effect on glossy surfaces.

• Apply Natural Varnish randomly using a sponge, soft brush or rag leaving treated and untreated areas.
• The result when dry is contrasting matt and glossy areas.

Note: In these cases protection will only be assured where the Natural Varnish was applied

Clean Up

Soap and water

Restrictions

• Not suitable for use on floors.
• Do not use outside on significantly rusted surfaces.
• Do not use outside where it will be exposed to intense UV, Weathering etc.
• Do not apply directly to surfaces finished with Rust Spirit, Copper Spirit or Bronze Spirit, these surfaces should be finished with Spirit Sealer before applying Natural Varnish.