Polytrol is a deep penetrating oil which restores the original colour and appearance of dull or tarnished plastics, gelcoats, metals, and other surfaces.
It penetrates the surface, re-wetting the pigments to restore their lustre and colour which has been lost through exposure to sunlight, rain, and pollution and it also gives corrosion protection. Â When used on tarnished metals, it brings back the shine and gives long-term protection against corrosion.
Simple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces and can even be used on fibreglass (GRP). Polytrol dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake.
Polytrol is now available in a handy 250ml spray can, great for quick application and difficult to reach areas. Please see the directions for use to find out how to apply it.
Ideal Uses for Polytrol Colour Restorer
- Brightening faded car bumpers
- Reviving the gelcoat on your boat
- Restoring the shine to metal fixtures
- Rejuvenating flat or chalky paint dulled by weathering
- Brightening the surface of tiles in stone, terracotta, marble, slate, etc.
- Reviving the colour of faded garage doors
Restrictions
DO NOT use Polytrol on white surfaces, it will not work as Polytrol is designed to restore pigments.
Surface Preparation
All surfaces must be clean, dry and free of dirt, grease, grime and mildew. All waxes, polishes, silicone etc. should be completely and thoroughly removed. Treat any mildew with a 50:50 bleach and water solution. Scrub the solution on to the surface and allow it to stand for 10-15 minutes then rinse thoroughly.
Using Polytrol on plastic, gelcoat, tiles, painted surfaces etc.
Clean the surface with warm soapy water or Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on stone, brick, etc.
Clean the surface with Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on metal
Clean the surface with warm soapy water and rinse thoroughly or use an appropriate solvent (follow manufacturer’s instructions). Leave the surface to dry for a minimum of 24 hours.
Application of Polytrol Colour Restorer
General directions
Always work in areas that can be completed 10-20 minutes to ensure an even appearance. If the surface absorbs the Polytrol unevenly (i.e. some matt and some shiny patches) move any surplus oil from shiny areas to matt areas. Wipe off any excess Polytrol with a lint-free cloth before it becomes tacky. For a shinier finish, buff the surface with a lint-free polishing cloth.
When using the Polytrol 250ml spray can, simply spray on liberally, wipe off any excess and leave to dry.
Applying Polytrol to plastic, gelcoat, tiles, painted surfaces etc.
Apply Polytrol liberally and evenly with a brush or cloth. Allow it to work for 10-20 minutes. Wipe off any excess with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to stone, brick, etc.
Apply Polytrol liberally and evenly with a brush or cloth and leave it to work for 10-20 minutes. Brush out or wipe off any excess Polytrol with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to metal
Apply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off any excess Polytrol with a clean lint-free cloth. Leave to dry.
Note: Polytrol is not a surface coating. Its place is in the surface, not on top.
Maintenance
Maintenance is due when a Polytrol treated surfaces shows signs of fading. Prepare and re-treat surfaces as directed above.
Clean Up
Clean any tools used with white spirit. Polytrol is non-flammable, however any rags, steel wool etc. soaked in Polytrol may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing of them with household waste. Rags may be laid flat and air-dried before discarding.
Things to Remember
- Cover and protect everything you do not wish to treat.
- Apply between +5°C and +35°C.
- Do not apply in direct sunlight or on to hot surfaces.
- Do not allow excess Polytrol to dry and create a film on the surface (always remove excess product).
- Do not use Polytrol on white surfaces.
Bob Garrett –
Verified Owner
Amazed at the results on a grp garage door though it did need three coats to remove cover some dry patches. Just one coat made brown plastic drainpipes look like new.
Thoroughly recommend this.
matt –
Verified Owner
it was delivered to my neighbour, and i wasnt left a note, so it was a week before i got it, but that aside it is an excellent product, i used it on my upvc window frames, wood effect that were looking very faded, and it is like painting a gloss finish on to them, really brought them back to life.
Owatrol Team –
Hi Matt,
We are sorry to hear that your order of Polytol was left with a neighbour and you were made unaware – sadly, this is out of our hands as we do not make the deliveries our selves.
We are very glad that you had such a great experience with the Polytrol though, perhaps if you have any before and after shots you could send them our way?
All the very best,
The Owatrol Team
Barbara –
Verified Owner
I used this product on my faded composite front door. The results were excellent! The door looks brand new. A fantastic product.
Anthony –
Just finished covering a composite brown door. Cannot believe the difference – it looks brand new! If I could give this product a 10 I would.
Owatrol Team –
Hi Anthony,
Thank you very much for your recent Polytrol review. We’re glad you had such a good experience.
All the best,
The Owatrol Team
Anthony morris –
Verified Owner
It does exactly what it says. Good product, def recommend to friends and family.
I used it on my front door which is UPVC. It enhanced the colour and saved me from having to replace it with a brand new one.
Steam1000 –
Verified Owner
Bought sample pot to hopefully bring milky faded black grp door back to shine.
The product has given the shine back to the door from a distance looks new again… but up close, I can still see the faded milky like appearance through the shine but that’s me being picky.
Definitely try this on your door
Jack Ridings –
Verified Owner
Amazing product. I used it on my very badly faded upvc guttering and it restored most of the surface to virtually new. I also used it on the upvc sill to my front porch, the surface of which was badly and unevenly faded, in some places shiny and in other places matt and worn. I was going to try to cover this somehow with a upvc moulding but after using your product it now looks virtually new again and has saved me a job that I was not sure how to do. Glad I found your product.
Thanks.
Owatrol Team –
Hi there Jack,
We’re so pleased you’ve had a great experience using Polytrol. If you have any we’d love to see some before and after shots of your guttering. You can email them to us at sales@owatroluk.com
Many Thanks,
The Owatrol Team
Geoff Hill –
Verified Owner
Used Owatrol on my front door. It was easy to use and did exactly what it said on the tin. Excellent product.
simon cloake –
Verified Owner
Amazing stuff!!! My old UPVC Red front door was looking rather sad so after reading some reviews i brought a spray can of this stuff and WOW!!! My door looks like new. I cannot praise this stuff highly enough.
Michelle Maxwell –
I was looking at replacing my garage door as it had gone from brown wood effect to faded white but this Owatrol brought a lot of the colour back. Its easy to use but make sure you are generous with the product but it does go a long way. I also used on my downpipes which had also been faded by the sun and again looked so much better. Lovely to find a product that does what it claims