Polytrol is a deep penetrating oil which restores the original colour and appearance of dull or tarnished plastics, gelcoats, metals, and other surfaces.
It penetrates the surface, re-wetting the pigments to restore their lustre and colour which has been lost through exposure to sunlight, rain, and pollution and it also gives corrosion protection. Â When used on tarnished metals, it brings back the shine and gives long-term protection against corrosion.
Simple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces and can even be used on fibreglass (GRP). Polytrol dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake.
Polytrol is now available in a handy 250ml spray can, great for quick application and difficult to reach areas. Please see the directions for use to find out how to apply it.
Ideal Uses for Polytrol Colour Restorer
- Brightening faded car bumpers
- Reviving the gelcoat on your boat
- Restoring the shine to metal fixtures
- Rejuvenating flat or chalky paint dulled by weathering
- Brightening the surface of tiles in stone, terracotta, marble, slate, etc.
- Reviving the colour of faded garage doors
Restrictions
DO NOT use Polytrol on white surfaces, it will not work as Polytrol is designed to restore pigments.
Surface Preparation
All surfaces must be clean, dry and free of dirt, grease, grime and mildew. All waxes, polishes, silicone etc. should be completely and thoroughly removed. Treat any mildew with a 50:50 bleach and water solution. Scrub the solution on to the surface and allow it to stand for 10-15 minutes then rinse thoroughly.
Using Polytrol on plastic, gelcoat, tiles, painted surfaces etc.
Clean the surface with warm soapy water or Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on stone, brick, etc.
Clean the surface with Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on metal
Clean the surface with warm soapy water and rinse thoroughly or use an appropriate solvent (follow manufacturer’s instructions). Leave the surface to dry for a minimum of 24 hours.
Application of Polytrol Colour Restorer
General directions
Always work in areas that can be completed 10-20 minutes to ensure an even appearance. If the surface absorbs the Polytrol unevenly (i.e. some matt and some shiny patches) move any surplus oil from shiny areas to matt areas. Wipe off any excess Polytrol with a lint-free cloth before it becomes tacky. For a shinier finish, buff the surface with a lint-free polishing cloth.
When using the Polytrol 250ml spray can, simply spray on liberally, wipe off any excess and leave to dry.
Applying Polytrol to plastic, gelcoat, tiles, painted surfaces etc.
Apply Polytrol liberally and evenly with a brush or cloth. Allow it to work for 10-20 minutes. Wipe off any excess with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to stone, brick, etc.
Apply Polytrol liberally and evenly with a brush or cloth and leave it to work for 10-20 minutes. Brush out or wipe off any excess Polytrol with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to metal
Apply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off any excess Polytrol with a clean lint-free cloth. Leave to dry.
Note: Polytrol is not a surface coating. Its place is in the surface, not on top.
Maintenance
Maintenance is due when a Polytrol treated surfaces shows signs of fading. Prepare and re-treat surfaces as directed above.
Clean Up
Clean any tools used with white spirit. Polytrol is non-flammable, however any rags, steel wool etc. soaked in Polytrol may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing of them with household waste. Rags may be laid flat and air-dried before discarding.
Things to Remember
- Cover and protect everything you do not wish to treat.
- Apply between +5°C and +35°C.
- Do not apply in direct sunlight or on to hot surfaces.
- Do not allow excess Polytrol to dry and create a film on the surface (always remove excess product).
- Do not use Polytrol on white surfaces.
Louise Farrance –
Bought this to restore a faded hot tub – I never bother to write reviews but I’m seriously blown away with how fantastic this product worked and it was so easy to apply. A little product goes a long way. The photo shows project half way through to show the difference.
Owatrol Team –
Hi there Louise,
Thank you for your kind review of Polytrol – we’re happy to hear, and see, how well it worked for you on your hot tub.
All the best,
The Owatrol Team
Tina Arul –
Verified Owner
I bought the polytrol to try to revive my front door. I saw someone using it on YouTube.
I wasn’t disappointed- the product went on easily with a clean cloth and dried quickly and since then people have commented positively. My front door looks great.
So good to buy something which is not a false claim and literally does what it says on the tin.
Will buy again.
Owatrol Team –
Hi there Tina,
Thank you for your kind review of Polytrol being used on your front door.
We’re very happy to hear that it worked well for you 🙂
All the best,
The Owatrol Team
Paul –
Verified Owner
Best product I have ever used
Solved the fading chrome trim issue on my Mercedes
Fantastic
Owatrol Team –
Hi there Paul,
Thank you for your kind review of Polytrol – we’re happy to hear how well it has worked on your Mercedes chrome work 🙂
All the best,
The Owatrol Team
Leslie Anne –
Verified Owner
This is an excellent product. Someone had mentioned our door was looking faded, so I checked on the internet for suitable products and found Owatrol Polytrol was recommended by many. It was easy to apply with a paint brush, it dried in just over 24 hours, and it made the door look new again. Sorry for the shadow and different angles in my photos, but you can get an idea of the improvement. Highly recommended!
Rodger childs –
Verified Owner
Brilliant.really smartened my car trim.
Kenny –
Verified Owner
Used on our composite front door. Easy to use and door now looks much better. Fast next day delivery.
Owatrol Team –
Hi there Kenny,
Thank you for your kind review of Polytrol – we’re happy to hear it has helped to restore your composite front door 🙂
All the best,
The Owatrol Team
Brian Castle –
Verified Owner
Looks good. Has a laquered finish. Hopefully it will be durable
John –
Verified Owner
I’ve tried various products from temu etc all of them lasted only days used owatrol 3 weeks ago still looks good big improvement time will tell how long it lasts but I am impressed at the moment gets my vote
Phil –
Verified Owner
Excellent product. Saved me a few hundred pounds to have the door repainted.
Owatrol Team –
Hi there Phil,
Thank you so much for your kind review of Polytrol. We’re very happy to hear how well it worked for you and your door.
All the best,
The Owatrol Team
MF 37 –
Verified Owner
Five stars+ for ordering and delivery, ordered Dec23rd late morning, delivered 9.40am on Christmas Eve. Owatrol used DHL, in my experience the best and most reliable courier company. All products I have ordered from Owatrol in the past have been very effective and easy to use.
Will review again when product is applied.
Merry Christmas to all at Owatrol.
Owatrol Team –
Hi there MF,
Thank you very much for your kind review! We hope that you get the results you are looking for with Owatrol Polytrol 🙂
Have a wonderful day.
All the best,
The Owatrol Team