Getting a perfect, professional finish when you paint a wall or fixture is key. Most of us nowadays take these kinds of jobs on ourselves rather than pay someone to do it for us.
At first sight, it seems the easiest thing in the world to slap on some paint. However, getting it wrong could mean your wall looks uneven and have visible marks from the brush or roller strokes. Here’s how to get it right first time:
Preparation is important
As with any job you want to make sure you’ve done all the preparation that’s necessary so that you can simply concentrate on the painting and nothing else. That means putting down covers for furniture and flooring, using painter’s tape on areas where you want to paint an edge like cupboards and windows, and cleaning walls of dust and grease to make sure the paint goes on easily.
Buy good quality products
While it might seem prudent to buy cheap paint, picking a mid-range product is generally more productive and safer. The same goes for the roller and brush you are going to be using. Using cheap brushes tend to leave stray hairs in the paintwork. Rollers, if they are low quality, can soak up paint unevenly and make it difficult to get a good coverage.
When you open the paint, stir it well and make sure you have an even mix all the way through. Paint can sit in stores for months and separate slightly so a bit of agitation is needed to get everything just right. You need to do this with any paint whether it’s water based or oil. Also, if you need to use more than one tin of paint, it would be sensible to mix it all in together before you start. This is because it’s possible for there to be slight variations in colour from different batches. You certainly don’t want an uneven finish to your work.
Have good lighting
You can’t see lines and patches if you don’t have enough light or can’t see properly. If you’ve ever painted a wall at night and then come down in the morning and found patches all over the place, you’ll know what we mean.
Use a Paint Additive
If you really want to improve your chances of getting a professional finish, then including a paint conditioner in your mix is always a good idea. The two main products we sell at Owatrol are:
Floetrol: Designed to be used with water based paints and make them perform more like oil based ones. The good news is that this helps reduce any unsightly marks because it improves the flow of the paint. It also maintains the wet edge for longer, allowing you more time to get a good finish. All you need to do is add a little to your paint as per the instructions and stir in well. It doesn’t affect the inherent qualities of the paint or its colour.
Owatrol Oil: This product has the same purpose as Floetrol but it’s a paint conditioner for oil-based paints rather than water-based finishes. In addition, it also acts as a rust inhibitor and helps to prevent cracking and peeling. Again, it’s easy to use and one of the best ways to get a great finish.
To sum up…
You may not need a paint additive for every one of your decorating jobs but it’s a useful product to have on the shelf and a godsend if you find you’re not getting the smooth coverage you need. It helps keep the edges wet as your painting and produces a highly professional finish. A paint additive is also helpful if you’re going to be painting in less than ideal conditions. For example a cold and damp winter’s day…
Finally, it pays to take your time and put on the paint with even, fluid strokes. Whether you use a roller or a brush, being in too much of hurry to can mean you don’t cover areas properly and then have to do extra work to get the final finish.
To learn more about Floetrol and Owatrol Oil, please use the following links: