remove limescale from your boat

How to remove limescale and rust spots using Owayell

Owayell is Owatrol’s new gelcoat and metal renovator which removes limescale, rust spots and yellowing quickly and effectively.

It is easy to use fast acting and will easily dissolve and remove limescale, sea salt, water marks, dirt, barnacle residue and rust spots amongst other things. Follow our simple how to guide to get your surfaces looking at their best.

Need to remove yellowing and limescale from your hull or rust spots from stainless steel?

How to remove limescale from your boat

Follows these simple steps to remove limescale and other problems from your surfaces:

  1. Apply the Owayell by brushing it on to your surface (you could also use a cloth here).
  2. Next sit back and rest for 5-10 minutes whilst it does its work
  3. Now rinse the surface with clean water and if necessary use a soft brush to help remove any stubborn areas

To remove rust spots from stainless steel you follow the same application process.

Check out our product demonstration video for super before and after photos and to see just how simple it is to use. Don’t forget that although Owayell is part of our marine range it’s not exclusively for use on boats – you can use it in any situation where you need limescale, yellowing or rust spots to be removed.

It would be perfect for agricultural vehicles, industrial metalwork, hot tubs and Jacuzzi and many other things besides.

Using Owayell as a liquid sander

To use Owayell as a liquid sander to passivate raw steel before painting, first dilute 1 part Owayell to 5 parts water. Then apply the solution to the surface and leave it to work for 10 minutes. Rinse off before drying and immediately applying the finish.

You can learn more about Owayell here. Please feel free to contact us via email or phone should you have any questions.

We hope you found this post on how remove limescale and rust spots using Owayell helpful. If you have any other advice or top tips, please feel free to leave them in the comments below. We love hearing from you!

You can also follow us on TwitterFacebook, Instagram or Pinterest at @OwatrolUK or find us under the hashtag #OwatrolUK

Owatrol Team
About Owatrol Team

Our team are ready and willing to support you with your requirements whether it is protecting your newly laid deck or renovating a luxury yacht, whatever the application Owatrol has the solution you are looking for.

2 thoughts on “How to remove limescale and rust spots using Owayell

  1. would owayell be any good on caravan gelcoats ,the front of caravan is white and oxidizes with the weather and traffic films ,regards john

    1. Hi there John,

      Yes, Owayell should work well for this purpose. We do however recommend purchasing a sample pot first (£5 with free delivery) and complete a small test first to be sure.

      All the best,
      The Owatrol Team

Leave a Reply

Your email address will not be published. Required fields are marked *