Polytrol is a deep penetrating oil which restores the original colour and appearance of dull or tarnished plastics, gelcoats, metals, and other surfaces.
It penetrates the surface, re-wetting the pigments to restore their lustre and colour which has been lost through exposure to sunlight, rain, and pollution and it also gives corrosion protection. Â When used on tarnished metals, it brings back the shine and gives long-term protection against corrosion.
Simple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces and can even be used on fibreglass (GRP). Polytrol dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake.
Polytrol is now available in a handy 250ml spray can, great for quick application and difficult to reach areas. Please see the directions for use to find out how to apply it.
Ideal Uses for Polytrol Colour Restorer
- Brightening faded car bumpers
- Reviving the gelcoat on your boat
- Restoring the shine to metal fixtures
- Rejuvenating flat or chalky paint dulled by weathering
- Brightening the surface of tiles in stone, terracotta, marble, slate, etc.
- Reviving the colour of faded garage doors
Restrictions
DO NOT use Polytrol on white surfaces, it will not work as Polytrol is designed to restore pigments.
Surface Preparation
All surfaces must be clean, dry and free of dirt, grease, grime and mildew. All waxes, polishes, silicone etc. should be completely and thoroughly removed. Treat any mildew with a 50:50 bleach and water solution. Scrub the solution on to the surface and allow it to stand for 10-15 minutes then rinse thoroughly.
Using Polytrol on plastic, gelcoat, tiles, painted surfaces etc.
Clean the surface with warm soapy water or Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on stone, brick, etc.
Clean the surface with Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.
Using Polytrol on metal
Clean the surface with warm soapy water and rinse thoroughly or use an appropriate solvent (follow manufacturer’s instructions). Leave the surface to dry for a minimum of 24 hours.
Application of Polytrol Colour Restorer
General directions
Always work in areas that can be completed 10-20 minutes to ensure an even appearance. If the surface absorbs the Polytrol unevenly (i.e. some matt and some shiny patches) move any surplus oil from shiny areas to matt areas. Wipe off any excess Polytrol with a lint-free cloth before it becomes tacky. For a shinier finish, buff the surface with a lint-free polishing cloth.
When using the Polytrol 250ml spray can, simply spray on liberally, wipe off any excess and leave to dry.
Applying Polytrol to plastic, gelcoat, tiles, painted surfaces etc.
Apply Polytrol liberally and evenly with a brush or cloth. Allow it to work for 10-20 minutes. Wipe off any excess with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to stone, brick, etc.
Apply Polytrol liberally and evenly with a brush or cloth and leave it to work for 10-20 minutes. Brush out or wipe off any excess Polytrol with a clean lint-free cloth. Leave it to dry.
Applying Polytrol to metal
Apply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off any excess Polytrol with a clean lint-free cloth. Leave to dry.
Note: Polytrol is not a surface coating. Its place is in the surface, not on top.
Maintenance
Maintenance is due when a Polytrol treated surfaces shows signs of fading. Prepare and re-treat surfaces as directed above.
Clean Up
Clean any tools used with white spirit. Polytrol is non-flammable, however any rags, steel wool etc. soaked in Polytrol may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing of them with household waste. Rags may be laid flat and air-dried before discarding.
Things to Remember
- Cover and protect everything you do not wish to treat.
- Apply between +5°C and +35°C.
- Do not apply in direct sunlight or on to hot surfaces.
- Do not allow excess Polytrol to dry and create a film on the surface (always remove excess product).
- Do not use Polytrol on white surfaces.
Jim –
Amazing product, I only bought the small tin to do our front door. I could do half of the estate with it!! I just applied with a microfibre cloth wrapped around 1 finger. So easy and it really has given a like new look to the door. So glad I found this product.
J. Bateson –
Verified Owner
What a brilliant product! My 9 year old navy blue composite door had faded badly in the sun and was looking really shabby. I followed the instructions and it was so easy . Now looks like new!! Thank you very much
Allan Davies –
Verified Owner
Best thing I ever bought. Take a look at this…
Craig E. –
Verified Owner
Super easy to use and has a great finish. We got just a small pot (125ml) and barely used a quarter of it for the door. Taped all the edges and the windows etc before applying liberally with a brush, let it work for 10-20 mins and then wiped away any excess with a lint free cloth. In about 30 mins of effort it’s made our ccomposite door look like a new one and all the UV damage/fading has just disappeared. Brilliant little product. We even used it on the gutters around the porch and they look brand new.
Peter Davies –
Verified Owner
Excellent product. Totally restored faded UPVC anthracite patio doors. Very easy to apply. Only been on for 2 weeks so can’t say how ling it will last with sun etc. But now doing more windows.
JohnB Smith –
Verified Owner
Really impressive, easy to apply.
Rally only one thing to say.
“Does what it says on the tin”
Very satisfied.
Gary –
Verified Owner
On receiving the delivery I thought that it was a very small can for the money, however, having used it it was surprising how well it covered the door I was restoring, with plenty left for future use.
Excellent delivery service, brilliant product.
Adrian Key –
Verified Owner
Brilliant product, our red front door looks brand new and it was very discoloured. You don’t have to use too much either so a little goes a long way. Next job is to use it on the plastic trim on my van. Excellent service too from the company.
Neil Muir –
amazing product – restored our red uPVC door to like new
EDWARD ENTWISTLE –
Verified Owner
five star review for a five star product – used Polytrol on 2 of my composite doors which were badly affected by the sun and the result has been amazing. Would highly recommend