The gelcoat on a boat is an outermost layer on the hull of a vessel. Through epoxy, a polyester resin, a catalyst and other chemicals, it provides water-resistant properties. Gelcoat combined with fibreglass produces a strong and smooth surface, preventing the hull of the boat weakening. Over time the gelcoat on your boat may start […]
Help & Advice: Page 17
All Articles
Protecting wood and wooden surfaces, for example, deck rails, in the marine environment is of vital importance. The environment can present all sorts of effects that can not only significantly reduce the aesthetic aspect of the wood but also cause deterioration of it too. Primarily due to the salt from the water and the exposure […]
Makeover for a cedar clad garden office and gym
Last Revised in Before & After, Case Studies, For the Garden, Wood CareIt never ceases to amaze us what a difference a new finish makes to wood cladding. We have recently had a customer who was in desperate need of a makeover for cedar clad garden office & gym. Roger at R and A Pressure Washing has given us another great case study to show you and we […]
How to revive a composite front door
Last Revised in Before & After, Case Studies, Decorating, How To GuidesOne of the most popular reasons customers use Polytrol colour restoring oil, is to revive their composite front door. We have heard some people being quoted hundreds of pounds for a new door, only to give Polytrol a go and be completely impressed and shocked by the results – not to mention relieved that they […]
How to clean untreated wood cladding and restore its colour
Last Revised in For the Garden, How To Guides, Wood CareIf left untreated, wood cladding will eventually become ‘weathered’ and turn grey due to sun exposure. It will also become dirty, which can prevent your new finish from properly adhering to the wood. Before attempting to apply your new finish, it’s essential to clean the untreated wood to remove all of the dirt and grime […]
If you want to protect your wooden raised beds from the weather, there are some simple and effective steps you can take. Once constructed, the best solution is to treat them with the right paint or oil finish. It will make sure your beds remain in tip top condition over time and don’t warp or […]
How to remove black marks from your boat with Blackbat 2 in 1
Last Revised in Before & After, How To Guides, MarineWith Blackbat 2 in 1, it is quick and simple to keep your boat clean and looking at its best It seems we devote so much time and hard work into keeping boats clean, however by using the right products you can significantly reduce the time and effort needed, so you can enjoy your boat […]
Before embarking on finishing your wood cladding, it’s important to make sure that any old coatings are fully removed. If your wood cladding has not been finished with anything before then you can skip this step. However, if it has, you’ll need to remove it. Follow our simple guide to find out how to strip […]
When the gelcoat on your boat has faded, it can make your boat look dull, tired and lacklustre. It can certainly make you lose your enthusiasm for its appearance! Through damage caused by the elements, the soft surface of the gelcoat is eroded and can leave it looking chalky and dull in its appearance. However, […]
Composite decking is an attractive, practical, and long-lasting addition to just about any garden. However, keeping it attractive and making sure it’s as long-lasting as it can be will require a little bit of maintenance now and again. This does not have to be difficult or hard work. Cleaning Your Composite Deck You can help keep […]









