Woodcare Background
The Owatrol Blog

How To Guides: Page 7

Handy How to Guides that will show you step-by-step on how to use Owatrol products.
We want to help you achieve the best possible finish.

All Articles

Using a pressure washer to remove Dilunett stripper from a deck

Over time, the wood on your boat interior may need stripping. It may have lost its shine and turned dull due to unsatisfactory finishes; there may be loose varnish or water may have seeped into it causing damage. Whatever the reasoning, it may be time to strip the surface of the wood and start afresh. […]

How to restore a faded gelcoat

The gelcoat on a boat is an outermost layer on the hull of a vessel. Through epoxy, a polyester resin, a catalyst and other chemicals, it provides water-resistant properties. Gelcoat combined with fibreglass produces a strong and smooth surface, preventing the hull of the boat weakening. Over time the gelcoat on your boat may start […]

protect deck rails using Deks Olje

Protecting wood and wooden surfaces, for example, deck rails, in the marine environment is of vital importance. The environment can present all sorts of effects that can not only significantly reduce the aesthetic aspect of the wood but also cause deterioration of it too. Primarily due to the salt from the water and the exposure […]

Raised garden bed

If you want to protect your wooden raised beds from the weather, there are some simple and effective steps you can take. Once constructed, the best solution is to treat them with the right paint or oil finish. It will make sure your beds remain in tip top condition over time and don’t warp or […]

Choosing a Wooden Cladding Species

Wooden cladding can be a great way to enhance the exterior of a building. However, there are different types of wood cladding and it’s important to make the right choice. One of the major things to decide upon is which type of wood you want. This will impact both the appearance of the building and […]

how to protect your wood cladding

Before embarking on finishing your wood cladding, it’s important to make sure that any old coatings are fully removed. If your wood cladding has not been finished with anything before then you can skip this step. However, if it has, you’ll need to remove it. Follow our simple guide to find out how to strip […]