Flooring Background

Solid Colour Stain

All-in-one exterior masonry and wood opaque matt finish in 35 shades

from 21 reviews
SCS packaging
  • Opaque matt finish available in 35 different shades
  • Excellent adhesion and long lasting performance
  • Guaranteed for 15 years on vertical surfaces and 5 years on horizontal surfaces on bare wood
  • Excellent for masonry, decking, cladding, outdoor furniture and so many more

Owatrol Solid Colour Stain (SCS) is an opaque protection and finish designed for use on masonry as well as both new and weathered exterior wood surfaces. It contains Owatrol’s Emulsa-Bond, giving it excellent adherence without the need for lengthy preparation and priming. This is unrivalled by other available products.

For use as a masonry paint, we recommend using SCS over other products on the market due to the stabilising solution it has. Many other masonry paint products require you to stabilise the surface before the paint can be applied, which can require extensive preparation and priming. However, due to SCS having Emulsa-Bond (a mix in bonding primer) built into it, this step is negated – meaning you can just get on with the job at hand.

Why should I use SCS?

The primary reason for using SCS is simply that there’s nothing else as good on the market. SCS is guaranteed for 15 years on vertical surfaces and 5 years on horizontal surfaces. The most notable quality of SCS is that it will not flake or peel! Not only can SCS be used on new, old and previously coated external wood surfaces but it protects as well as finishes. It provides lasting protection against moisture and has excellent adhesion and flexibility of the film.

SCS is perfect for delivering long-lasting beauty on sidings and cladding, hard-wearing consistency on fencing and high-traffic performance on decks, docks and other horizontal surfaces. You can use SCS on softwood, hardwood, tropical wood and thermo-heated wood surfaces. You can even use SCS on weathered vertical masonry including stucco, painted block and EIFS. It’s excellent for use on outdoor furniture and the wide range of available shades means you can create a unique style for your garden.


Owatrol Solid Colour Stain (SCS) is available in 1, 2.5, 10 & 20 litre containers and in 35 different shades. You can also purchase a sample pot to help you to decide on colours.

Ideal Uses for Solid Colour Stain

  • Excellent variety of colours for exterior masonry
  • Perfect for decks, docks and other horizontal surfaces
  • Stunning on outdoor furniture in any of the 35 shades
  • Long-lasting protection for fencing and other vertical surfaces
  • Rich matt finish on concrete out buildings and garages
  • Beautiful for log cabins and summer houses
  • Performs well on masonry, new and old wood

This Product is DeckMark & CladMark Certified.

Find out more

Always read the Solid Colour Stain Technical Data Sheet before using and follow the instructions carefully.

Surface Preparation

Exterior masonry surfaces

Before using SCS, all masonry surfaces must be clean, dust-free and free of any loose material. We recommend using a stripper such as DSP 800, which is perfect for the removal of all coating types. You must ensure that all previous coatings are removed before using SCS, otherwise, it will not penetrate properly and you will not gain your desired finish.

New wood surfaces

Before using SCS, all surfaces must be clean, dry and free of dirt, grease and mildew. However, if your wood is new it will also have a hard shiny surface known as mill glaze which prevents maximum penetration – preventing any coating from adhering properly. We would always recommend new wood is treated with Seasonite new wood protection and then allowed to weather for a minimum of 6 months after which time Solid Colour Stain can be applied following the instructions for weathered wood.

Weathered wood surfaces

Untreated wood surfaces which have weathered for 6 months or more need a thorough cleaning to restore their original colour and remove any built-up dirt before applying SCS. To do this simply use Net-Trol wood cleaner which is scrubbed on, left to work and then rinsed off. Be sure to allow your wood to dry thoroughly for 48 hours afterwards before applying Solid Colour Stain.

Previously coated surfaces

In this case, first sand or scrape to remove any loose, flaking or peeling finish (if there is any). If necessary, you should strip the surface with Dilunett Gel and then neutralise it with Net-Trol wood cleaner. Then allow 48 hours for the surface to dry before applying SCS.

Applying Owatrol’s Solid Colour Stain

Owatrol’s Solid Colour Stain is incredibly easy to apply by following these simple instructions. First, apply a coat of SCS avoiding heavy application. Next, allow this coat to dry for 3-4 hours before applying a second coat. If applying by spray, always back-brush or back-roll immediately after application to ensure uniformity of colour, coverage and penetration.


Surfaces with harsh exposure to weather or traffic will wear more quickly than other areas. In these cases, clean or brush affected areas (with Net-Trol for wood) and recoat as necessary.

Clean Up

Clean all tools and equipment with soap and water whilst still wet. If allowed to dry, remove with paint stripper. NOTE: Rags soaked in this product should be soaked with water before disposing of with household waste.

Things to Remember

  • Before starting your project on wood surfaces, test penetration and absorbency by sprinkling water lightly onto the wood. If the water is absorbed rapidly, surface is free of contamination and ready for staining. If water is repelled, thorough preparation, as for new wood must be performed.
  • Before starting application, test the colour choice on a small area and allow to dry to determine final colour.
  • Purchase sufficient product for the whole job and mix all product together before starting to avoid colour variances.
  • Cover everything you do not wish to coat, including plants and shrubs.
  • Apply between 10°C and 35°C.
  • Do not apply in direct sunlight, on hot surfaces.
  • Do not apply if cold and/or wet weather is expected within 48 hours.
  • Mix product thoroughly before and during application. Do not thin.
  • For wood, always work the entire length of a deck board or horizontal siding to a logical break, such as a window or door frame.
  • Vertical siding should be coated from top to bottom.
  • If using an airless sprayer it should be (.017-.021 tip at 1800-2000 psi (124-138 bars))

5 star reviews for Solid Colour Stain

Write a Review
  1. Avatar


    Thought you might like to see some photos of my bin storage. I used black solid colour stain, two coats and a perfect Matt finish. Love it!! 😍 All my neighbours are interested too!

  2. Avatar

    George Mckendrick Verified Owner

    Update from 2010.

    I reviewed this product in 2010

    Durining 2020 and lockdown I in the shed found 4 litre tin with an ill fitting lid . The hut and fence needed redone and the owatrol went on after 10years..perfectly . I cannot recommend this product enough

    • Owatrol Team

      Owatrol Team

      Hi there George,

      Thank you so much for your review.
      That’s great news that S.C.S was still good for you after 10 years! We’ve never had feedback of S.C.S being applied after being left unused for so long, so it’s great to hear it still worked well for you.

      All the best,
      The Owatrol Team

  3. Avatar

    Balazs Kiss

    These old oak posts have been painted after some prep work, to compliment the new millboard deck on this jetty project.

    After using SCS on deck
  4. Avatar

    Michele Williams

    Can I use this over weathered Textrol HES on upright decking posts and handrails provided I give them a good sanding to would the paint give a better finish ?.

    • Owatrol Team

      Owatrol Team

      Hi Michele,

      Solid Colour Stain can be used over previously coated surfaces provided the surface is sanded or scraped thoroughly to remove all loose flaking or peeling finish. If necessary, strip with Aquanett and neutralise with Net-Trol.
      The surface must also be free of dirt, grease, grime and mildew and once clean, you must allow wood to dry 48 hours.

      I hope this was helpful, please don’t hesitate to contact us again should you require further assistance.

      All the best,
      The Owatrol Team

  5. Avatar

    Catherine Chandler Verified Owner

    We have used the black solid colour stain to renovate cedar cladding which had weathered very unevenly and looked a bit of an eyesore. The stain is a joy to use, with brilliant coverage and a smooth application. We are very pleased with the result.

    • Owatrol Team

      Owatrol Team

      Hi Catherine,

      Thank you for your review of SCS – we are glad you had a great experience using it on your cladding.

      If you have any before and after shots of you using SCS, we would love to see and share them on our social media pages – if you are happy to do this, please send your pictures to: sales@owatroluk.com

      Thanks again.

      All the best,
      The Owatrol Team

  6. Avatar

    Mike Blanchard Verified Owner

    I’ve used the Solid Colour Stain for years in some pretty exposed situations on the west coast of Scotland. On fresh cut larch poles the Butinox stain, that I used, flaked off after a couple of years, but the SCS, which I subsequently applied, is still looking good 10 years later, flexing with the timber and not flaking at all. Garden furniture, cladding, windows, concrete steps – all have been painted with SCS, it really is that good.

  7. Avatar


    I LOVE these products, I first came across them living for nearly 15 years in Sweden from 1999. I was introduced to them by the local paint store and used the Swedish Red on all my out houses and sheds, others painted once every other year, I painted once and left in 2014 – the sheds looked great still.

    I also did the wooden parts of the house and used once the E-B solution primer added to some masonry paint I had and wanted to use on wood paneling, it was a great success.

    Now back in the West Country I have bought a timber building – originally Swedish 1950’s , painted first with a cream paint which obviously lasted long. I found out it was believed to be Owatrol! Then the buildings were painted with a brown yukky stain – which has stayed on all this time being replenished from time to time. I wanted to paint it and had one can of Slate Blue solid colour – YIPPEE it’s the perfect colour to do my house. I found a small independent paint store about 30 mins away and hey presto they had some cans OF …………….. SLATE BLUE!
    I’ve started June 2017 – BUT I know I won’t have enough so will have to perhaps decide to paint one of the gable end walls with another colour UNLESS I can find some slate blue ???????
    Is there any anywhere? I’ve searched the internet high and low through many pages, tried ebay, marketplace and preloved sites….. I’m happy with half cans too and will pay courier charges.

    Failing that does anyone have any idea what is the closest colour to the Slate Blue 303 – so I could maybe use that on my end walls instead?

    Looking forward to a positive response 🙂

    • Owatrol Team

      Owatrol Team

      Hi there!

      It’s great that you’re such a fan of Owatrol products and you certainly seem to be working hard to keep using them – I’m pleased to say we can definitely be of help here. Slate Blue – 303 has not been discontinued, it is just now called ‘Blue’ but is the same 303 we have just changed the name as we have adapted the colour range of our 3 opaque finished to be the same. You can purchase ‘Blue’ in Solid Colour Stain, Shed & Fence Paint or Decking Paint and they should all be the same colour as the ‘Slate Blue’ you have already. If you’re uncertain we’d recommend purchasing a sample pot first.

      Hope this helps,
      The Owatrol Team

  8. Avatar

    Janet. Verified Owner

    Purchased a sample tin in deep mahogany to stain the front door step. Goes on very easily and gave a perfect, even coverage after just one coat. Have applied a second coat and the finish is superb. The colour on immediate application is paler than the colour swatch on the website but within a minute or so the colour darkens to a rich mahogany that is exactly as shown on the swatch. Rainwater is repelled effectively and time will tell how the stain holds up over the coming months / years. I have used other Owatrol products which have always lived up to my expectations and have no doubt that this solid colur stain will be just as good. Also great service from Owatrol direct.

  9. Avatar

    Mike Phipps Verified Owner

    I had some “problem areas” on my Smart Garden Office due to four years of full sun that had caused some hairline cracking and knot movement. This stuff is expensive, more so than almost any other product I looked at, but the Smart Garden people recommend it. And now I see why. Excellent application, easy to work with, very good coverage and it has resealed and repaired the surface that now looks like new. Worth the money? So far so good. Ask me again in a few years, but I am confident.

  10. Avatar

    Carrie Hartley Verified Owner

    Brilliant service, arrived as promised, safe and secure. Large area to cover but I was lucky with the weather. Easy to apply and although very early days I’m delighted with the results. One question for you, will it adhere to garden plastic seating as I’d love to give new life to some fading old faithfuls?. I look forward to many years of not screaming with despair every March when I viewed the havoc winter had reaked to my decking.

    • Owatrol Team

      Owatrol Team

      Hi Carrie, we’re so glad you’re happy with Solid Colour Stain. Unfortunately no you can’t use it on plastic seating, however you could use Owatrol Deco, our multi surface paint for this purpose.
      Many thanks,
      The Owatrol Team

Add a review

The maximum upload file size: 10 MB.
Maxiumum of 5 files
You can upload: .jpg, .jpeg, .png

Colour Card top border

Request a Colour Card

Not sure which colour is best, request a FREE colour card sent direct to your door

Coverage Calculator Background Decking

Coverage Calculator

How much do I need?

Calculate Again
This coverage indication is only a guide and actual coverage is dependent on surface type, age, porosity etc.
Cogs Background
Coverage: 8-10m2 per litre
Tools: Brush, Roller, Airless Sprayer
Suitable for: Exterior use
Clean up: Soap & water
Drying Time: 24-48 hours
Re-coating Time: 3-4 hours
Suitable Surfaces: Exterior masonry, new or weathered exterior wood